INFICON HAPSITE ER Chemical Identification System - Manual (Page 81)

2 - 43
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
2.10.2.2 Care of the Backpack
 Avoid exposing the backpack to solvents and other active chemicals.
 Avoid storing the backpack in direct sunlight.
 Wash the backpack as necessary with water and mild soap.
CAUTION
Do not store the backpack with the fabric in contact with
concrete. The moisture and chemicals in concrete can
weaken nylon.
2.11 Hot Swap Cable (IPN 930-246-G1)
The Hot Swap Cable is used to provide an external power source for the HAPSITE.
When the Hot Swap Cable connects an external battery and the 24 V(dc) power
port on the HAPSITE, the internal battery can be changed without the loss of power
to the HAPSITE.
2.11.1 Connecting the Hot Swap Cable
WARNING
Do not use the hot swap cable in the rain.
1 Plug the "L" connector into the back of a charged battery. See Figure 2-54 .
Figure 2-54 Hot Swap Cable Components
“L”
Battery
Power
Connector
Connector