INFICON HAPSITE ER Chemical Identification System - Manual (Page 163)

4 - 3
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
4.1.3 Regulatory Compliance Information for CANADIAN Users
This section of the Operating Manual lists Industry Canada (IC) compliance
information for the Hapsite system that contains the wireless communication
option.
4.1.3.1 Industry Canada (IC) Notices
This equipment complies with Canadian RSS-210.
CAUTION
This device has been designed to operate with an
antenna having a maximum gain of 5.0 dB. An antenna
having a higher gain is strictly prohibited per regulations
of Industry Canada (IC). The required antenna impedance
is 50 ohms.
To reduce potential radio interference to other users, the antenna type and gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not
more than required for successful communications.
NOTE: This equipment contains an OEM Embedded Wireless Bridge
(Ethernet to Wireless LAN) Module from Quatech Inc.
IC: 3913A-WLNG1
This device compiles with RSS-210 of Industry Canada (IC) and is subject to
the following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference
that may cause undesired operation.