INFICON HAPSITE ER Chemical Identification System - Manual (Page 5)

DECLARATION
OF
CONFORMITY
This is to certify that this equipment, designed and manufactured by:
INFICON Inc.
Two Technology Place
East Syracuse, NY 13057
USA
meets the essential safety requirem ents of the European Union and is placed on the market accordingly. It has
been constructed in accordance with good engineering practice in safety matters in force in the Community and
does not endanger the safety of persons, domestic animals or property when properly installed and maintained and
used in applications for which it was made.
In addition, this is to certify that this equipment has also been designed and manufactured, having regard to the
state of the art, to ensure complies with the Protection Requirements of EMC directive 2004/108/EC.
A Technical Documentation File is also available for review by competent authorities and will be maintained for a
period of ten years after the date on which the equipment was last manufactured. In additional to this file,
technical, installation, maintenance and application information concerning this equipment can also be found in the
Operating Manual(s) for this product or product family.
Equipment Description:
HAPSITE ER Portable GC/MS with wireless communications, including the
HAPSITE Service Module, NEG Pump, Battery and AC to DC HAPSITE Adapter,
Headspace Accessory, Situ-Probe Accessory, and SPME Accessory.
Applicable Directives:
2006/95/EC (LVD)
1999/5/EC (R&TTE / EMC)
(The required compliance statement concerning this directive can be found in
Chapter 4 of this manual.)
2004/108/EC (General EMC)
2002/95/EC (RoHS)
Applicable Standards:
Safety: EN 61010-1:2001
Emissions: ETSI EN 300 328-2 V1.4.1: 2003 (R&TTE Emissions)
(ERM for equipment operating in the 2.4 GHz ISM band)
ETSI EN 301 489-17 V1.2.1: 2002 (Flicker & Harmonics)
(ERM - Specific conditions for 2.4 GHz)
EN 61326:2006 (Radiated & Conducted Emissions)
Class A: Emissions per Table 3
(EMC – Measurement, Control & Laboratory Equipment)