beautypg.com

INFICON HAPSITE ER Chemical Identification System User Manual

Page 56

background image

2 - 18

IP

N 07

4-

47

1-

P1

B

HAPSITE ER Operating Manual

The Service Module requires a power cable and a RS-232 communications cable
to allow communication with the Laptop.

Figure 2-18

shows the power cable

connected at the left back corner of the Service Module.

Figure 2-18 Power Cable Attached at Back Left of the Service Module with Power Switch Highlighted

The RS-232 communication cable is shown in

Figure 2-19

.

Figure 2-19 RS-232 Communication Cable

To prepare the Service Module for use with the HAPSITE, the aluminum plug must
be removed. If the plug is not under vacuum, the plug can be easily detached. If
under vacuum, the plug will need to be removed using the following procedure:

NOTE: The Service Module is shipped under vacuum from the factory with this

plug in place.