beautypg.com

INFICON HAPSITE ER Chemical Identification System User Manual

Page 217

background image

5 - 23

IP

N 07

4-

47

1-

P1

B

HAPSITE ER Operating Manual

5.6.2 Quick Reference SOP — Analyze Mode with SituProbe

1

Double-click the ER IQ software icon.

2

Verify that the desired sample configuration (i.e., Concentrator) is installed.

3

Make sure the SituProbe is set-up properly. See

Section 2.7, SituProbe, on

page 2-24

for assembly information.

4

If the system is Shutdown or in Extended Standby, either power on the
HAPSITE or take the system out of Standby. Depending upon the method, the
HAPSITE will begin preparing the Concentrator. If needed, see

Section , , on

page 3-29

.

5

When the system has finished preparing, click the Run button in the pop-up
window.

6

When the screen prompts, Collect Sample Now For and Sampling is Done,
no action is required from the user.

7

When the run is complete, a METHOD FINISHED prompt will appear.

8

To analyze the data, see

Chapter 9, Data Review

.