INFICON HAPSITE ER Chemical Identification System - Manual (Page 327)

10 - 3
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
CAUTION
The HAPSITE ER software is case sensitive. Folder
names on the HAPSITE and Laptop must be exactly the
same. Example: Bakeout must be written as Bakeout and
not as bakeout or BAKEOUT.
10.1.2 Event Log Files
Event Log Files are created automatically by the system to record system state
information (such as heating, valve changes, etc.) for future reference. These files
are created daily when running the HAPSITE using the ER ER IQ software. These
files are saved on the Laptop.
10.1.3 Data Files
Data Files are automatically saved to the HAPSITE hard drive under a folder with
the same name as the Method used to run the analysis. For example, if a Method
is named Method01, its Data Files would be saved in a folder entitled
data\Method01\.
The default naming convention for these files is to use the method name with an
underscore and 3 digits signifying the run number added to the end. The first file
would start with _001. The name may be modified by opening Method Editor and
pressing next until the Data page is displayed, shown in
Figure 10-4 .