INFICON HAPSITE ER Chemical Identification System - Manual (Page 351)

11 - 13
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
11.4.2 SituProbe
CAUTION
Only trained users should create methods. Choosing the
incorrect sampling device and/ or temperatures may
result in inaccurate data.
To create a SituProbe method, choose the SituProbe Sample Input Device. This
will bring up another temperature setting window for setting the SituProbe Oven
and Transfer Line temperatures. See
Figure 11-11 .
Figure 11-11 SituProbe Parameters
SituProbe Temperatures in Celsius
Oven . . . . . . . . . . . . . . . . . . . . . . . . The target temperature the Oven must
achieve before starting data acquisition. This
setting is not available when the SituProbe is
disabled.
Transfer Line. . . . . . . . . . . . . . . . . . The target temperature the Transfer Line
must achieve before starting data
acquisition. This setting is not available when
the SituProbe is disabled.
Hand Probe . . . . . . . . . . . . . . . . . . . SituProbe temperature settings before
starting the method. This setting is not
available when the SituProbe is disabled.