INFICON HAPSITE ER Chemical Identification System - Manual (Page 180)

4 - 20
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
7 Touch OK in the next ten seconds if the calibration was accurate for all four
targets. Otherwise, the touch screen will automatically restart after the ten
seconds have passed. See
Figure 4-23 .
Figure 4-23 Restart Calibration
8 When calibration is complete, the HAPSITE will return to the main screen.
4.3.2 Enabling/ Disabling the Touch Screen
If desired, the touch screen can be disabled and the HAPSITE can be operated
completely by the push buttons. This will prevent the screen from being
inadvertently touched during usage. The next two procedures outline how to
disable and enable the touch screen.
4.3.2.1 Disabling the Touch Screen
1 Touch MAIN or using the arrow keys, highlight MAIN and touch OK SEL. See
Figure 4-24 .
Figure 4-24 Display Button