INFICON HAPSITE ER Chemical Identification System - Manual (Page 473)

15 - 21
IP
N 07
4-
47
1-
P1
B
HAPSITE ER Operating Manual
To place the Service Module in storage, the aluminum storage plug is placed on the
opening where the HAPSITE connects, as shown in
Figure 15-30 .
Figure 15-30 Service Module Aluminum Storage Plug in Place
HINT: Confirm the RS-232 communication cable is connected to the Service
Module and Laptop. If the RS-232 communication cable is not attached,
refer to
section 2.6.1, Setting Up the Service Module, on page 2-17 before
proceeding.
The Service Module must be pumped down. Open the ER IQ program.
Double-clicking on the Pump Down icon will start the Pump Down process, as
shown in
Figure 15-31 .
Figure 15-31 Service Module Pump Down Button