Stake the dtm – Spectra Precision Survey Pro CE v3.6 User Manual User Manual

Page 99

DTM Stakeout

Stake the DTM

12. With the information correctly entered in the Stake DTM screen,

tap

6ROYH to continue.

13. The DTM Shoot screen will open with a

graphic that shows the DTM boundary,
the reference DTM surface, the
centerline if used, the occupy point, and
backsight direction. Tap the

7DNH 6KRW«

button to take a shot.

14. If a shot is taken when the prism is

located within the boundary (if selected
earlier) the graphic will change and the

Data

and

Result

cards will be filled in.

The graphic will show the current
triangle in the reference DTM surface
where the rod is located and a centerline
and offset, if selected earlier.

15. At anytime, you can view the current

DTM surface computed from the points
staked so far by tapping the

' 9LHZ«

button. The

6WRUH button will store the

last point staked. The

5HVXOW card

displays additional information about the