Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 329)

Survey Pro Reference Manual
R-172
7DQJHQW : The distance from the PC or PT to the PI
0LG 2UGLQDWH : The distance between the curve and the chord at the
center of the curve’s length.
([WHUQDO : The minimum distance between the PI and the curve.
$]LPXWK / %HDULQJ : defines the direction of the curve, tangent at the
PC.
Turn : defines if the curve turns to the Left or Right while viewing the
curve from the PC Point.
2. : appends the curve to the list.
Add to Map
The Add to Map screen is used to add the existing line and curve data
to the current job as a polyline.
Description : is the name that will be assigned to
the new polyline that will be added to the project.
/RFDWLRQ : can be used to manually enter the
coordinates for the first point of the polyline.
3RLQW : can be used to define the starting
location of the first point of the polyline by an
existing point.
Store Points : is the first point name that will be
used for the new points that are needed to add
the figure to the current job. All additional
points will be incremented from this point.
2. : adds the figure to the job at the specified location.
&DQFHO : closes the screen without adding any new data to the job.