Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 368)

Roads Menu
R-211
Add / Edit Template Screen
5RDGV (GLW 5RDGV (1HZ« or (GLW«) 7HPSODWHV ($GG« or (GLW«)
The Add / Edit Template screen allows you to add a template to the
road or edit an existing template.
Template : The Template column lists all the
templates that can be added to the road.
Selecting a template will display an image of
that template in the lower corner of the screen.
Once the first template is added, this box will
only list templates with the same number of
segments as the first.
Start Sta : is the location of the template on the
alignment.
&KHFN« : opens the Roads Report screen and
displays any errors (see Page R-207)
1HZ« : opens the New Template screen, which is identical to the
Edit Template screen, where a new template can be created (see Page
R-203).
(GLW« : opens the Edit Template screen where the selected template
can be modified (see Page R-203), although accessing the templates
editor from here will not allow inserting or removing of segments.
The Widenings Card
5RDGV (GLW 5RDGV ( 1HZ« or (GLW« ) :LGHQLQJV
The Widenings card of the New Road screen is
used to add or edit widenings.
A widening is a section of a road that changes in
width, but does not necessarily require any new
templates. The road width is adjusted by
changing only the width of the first segment of
the template that leads into the beginning of
the widening. Any additional segments, like
those that may describe a sidewalk or ditch, are
not adjusted.