Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 254)

Survey Menu
R-97
Remote Elevation
6XUYH\ 5HPRWH (OHYDWLRQ
The Remote Elevation screen will compute the elevation for the
occupy point by shooting a foresight with a known elevation, or it will
compute the elevation for a foresight when the occupy elevation is
known.
Known Elevation Is… : is where you specify if
the Occupy point or the Foresight point has a
known elevation.
Elevation : is the known elevation for the
selected point.
Shoot : defines if you want to perform a Direct
shot only, or Direct & Reverse shots to the
foresight.
HI : is the distance that the total station is above
the ground.
HR : is the length of the rod.
;
Store Pt : When checked, the elevation of the point specified here
will be replaced with the computed elevation.
7DNH 6KRW« : computes the elevation for the point that had an
unknown elevation and optionally writes that elevation to the
specified
Store Pt .
Results
OCC Elevation : displays the elevation for the occupy point.
FS Elevation : displays the elevation for the foresight point.