Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 21)

Getting Started
15
Zoom Window Button
After tapping this button, a box can be dragged across the screen.
When your finger or stylus leaves the screen, the map will zoom to
the box that was drawn.
Increase Vertical Scale
This button is only available when viewing a vertical profile. Each
time it is tapped, the vertical scale of the view is increased.
Decrease Vertical Scale
This button is only available when viewing a vertical profile. Each
time it is tapped, the vertical scale of the view is decreased.
Display / Hide Labels Button
In some screens, this button will simply toggle the point names and
descriptions on and off in a Map View, but in other screens it will
open the Map Display Options screen, which gives you even more
control over what is displayed in the Map View.
The Settings Screen
The Settings screen is used to control all of the settings available for
your total station, data collector, current job, and Survey Pro
software.
Most of the settings remain unchanged unless you deliberately
change them, meaning the default settings are whatever they were
set to last. For example, if you create a new job where you change the
direction units from azimuths to bearings and then create another
new job, the default direction units for the new job will be bearings.
Survey Pro behaves in this way since most people use the same
settings for a majority of their jobs. This way, once the settings are
set, they become the default settings for all new jobs and current jobs.
Some settings are considered critical and are therefore stored within
the job. The following settings are stored within a job and will