Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 22)

User’s Manual
16
override the corresponding settings in the Settings screen when it is
opened:
•
Scale Factor – Surveying Settings Card
•
Earth Curvature On or Off – Surveying Settings Card
•
Units for Survey Data (distances) – Units Settings Card
•
North or South Azimuth – Units Settings Card
•
Angle Units – Units Settings Card
•
GPS setup information such as localization, mapping plane,
etc. (Requires GPS Module)
Navigating to the Screens
The Settings screen actually consists of several
separate screens where each individual screen
contains different types of settings. There are
two ways to navigate to the various screens.
The first method is to tap the button to drop
down the list of available screens and then tap
on the desired screen from the list to open it.
The second method is to tap the buttons to the
side of the screen title, which will open the
previous or next screen respectively. For
example in the screen shown, you could tap
to open the previous (General
Settings) screen, or tap to open the next (Units Settings)
screen. Repeatedly tapping either of these buttons will cycle through
all the available screens.
Instrument Settings Page
The Instrument Settings are used to define the
type of total station that is being used so it can
communicate with the data collector. When your
data collector is connected to a total station, the
Brand and Model should be selected to match
your total station. If your exact model is not