Spectra Precision Survey Pro CE v3.6 User Manual User Manual
Page 72
User’s Manual
66
7. Begin your survey. When you traverse to a
new point, the New Occupy Point dialog box
will open showing you the azimuth
computed to the new backsight point from
the new occupy point. Once you are setup
over the new occupy point, and aiming
toward the new backsight point, press the
6HQG &LUFOH WR ,QVWUXPHQW
button to update
the
Backsight Circle
value and the horizontal
angle on the total station. Repeat this step
after setting up on each new traverse point.