Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 25)

Getting Started
19
square feet or square meter values.
Acres / Hectares : allows you to display from zero to four places
passed the decimal point for acre or hectare values.
Distances : allows you to display from zero to six places passed the
decimal point for distances.
Angles : allows you to include from zero to four fractional seconds
with angle values.
Stations : allows you to display stations in any of the following
formats:
•
12+34.123 : displays stations where the number to the left of
the + advances after traveling 100 feet or meters.
•
1+234.123 : displays stations where the number to the left of
the + advances after traveling 1,000 feet or meters.
•
1,234.123 : displays standard distances rather than stations.
Files Settings
The Files Settings allow you to select a control file or description file
to use with the current job.
Control File : allows you to select a control file to use with the current
job. Control files are discussed in more detail on
Page 28.
Description File : allows you to select a
description file to use with the current job.
Description files are discussed in more detail on
Page 32.
;
This File Uses Codes : Check this box if the
description file contains codes and associated
descriptions. Leave the box unchecked if the
description only contains descriptions (no
codes).