Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 246)

Survey Menu
R-89
Corner & Angle
6XUYH\ &RUQHU $QJOH
The Corner and Angle screen is used to store a
point that cannot be shot on a reference line
using a reflectorless total station where two other
points on the same line can be shot.
Foresight : is the name of the point that will be
stored.
Description : is the description for the point that
will be stored.
HR: 0.000 : shows that no rod height will be used
with this routine since all shots are direct
reflectorless.
6KRRW /LQH : will prompt you to take two shots on a line that
intersects with the point you want to store.
Note: Each shot can be in any location on the line.
(Shot 1 can be to the left or the right of Shot 2.)
$LP DW &RUQHU : will prompt you to aim at the corner
(the point that you want to store). Although no shot is
taken, the angles to the point will be used to compute
its location.
Note: After all shots are done, the computed elevation
is displayed for the new point. You can either enter a
different elevation or tap
2. to accept the computed
elevation.
%DFNVLJKW : accesses the Backsight Setup screen (Page R-72) where
the current backsight can be modified.
Line
Aim at target
(no shot)
Shot 1
Shot 2
Corner & Angle