Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 245)

Survey Pro Reference Manual
R-88
Corner & 2 Lines
6XUYH\ &RUQHU /LQHV
The Corner and 2 Lines screen is used to store a
point at the corner of a structure using a
reflectorless total station where a direct
measurement to the point is not possible, but two
points on two intersecting lines can be shot.
Foresight : is the name of the point that will be
stored.
Description : is the description for the point that
will be stored.
HR: 0.000 : shows that no rod height will be used
with this routine since all shots are direct
reflectorless.
6KRRW /LQH : will prompt you to take two shots
on Line 1, which intersects with Line 2 at the
point you want to store.
Note: Each shot for a line can be in any location on the
same line. (Shot 1 can be to the left or the right of Shot
2.)
6KRRW /LQH : will prompt you to take two shots on Line
2, which intersects with Line 1 at the point you want to
store.
Note: After all shots are done, the computed elevation is
displayed for the new point. You can either enter a
different elevation or tap
2. to accept the computed
elevation.
%DFNVLJKW : accesses the Backsight Setup screen (Page R-72) where
the current backsight can be modified.
Line 1
Line 2
Target
1
1
2
2
Corner & 2 Lines