Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 251)

Survey Pro Reference Manual
R-94
Record Mode
6XUYH\ 5HFRUG 0RGH
When running in Record Mode, all control of the total station is
performed from the total station’s keypad. The data collector will
simply log each shot that is taken from the total station.
This routine is typically used for topo work, where the total station
remains over a single occupy point during all shots.
Note: Not all total stations support record mode.
6HWWLQJV : located at the top of the screen, is a
shortcut to the Surveying Settings screen (Page
R-32).
Foresight : is the point name that will be used
when storing the next point. Once a point is
stored, it will be incremented to the next
available point.
Description : is the description for all the shots
that are stored.
HR : is the length of the rod.
6WDUW 5HFRUGLQJ : starts recording all shots performed from the total
station.
6WRS : stops record mode.
%DFNVLJKW« : accesses the Backsight Setup screen (Page R-72) where
the current backsight can be modified.