Spectra Precision Survey Pro CE v3.6 User Manual User Manual

Page 95

DTM Stakeout

3. Enter the rod height in the

field and the name for the first

point that is stored in the

Store Point

field. Future points are

stored with the next available point names.

4. You have the option of selecting a centerline and get offset and

stationing information for the staked points. Checking the

With

C.L.

checkbox and then tapping the

&HQWHUOLQH button will open

the Select Line screen where you can select an existing polyline or
alignment that defines a centerline. This information will also be
displayed graphically in the DTM Shot screen.

5. When

the

Generate TIN w\Staked Points

box is checked, a TIN will

be generated from the points that have been staked. This is
necessary if you want to view the surface from the points staked
in the 3D View screen. This must also be checked if you want to
get live cut / fill and volume values for the points staked. When
unchecked, the 3D View is unavailable, no volumes will be
computed, and cut / fill values cannot be viewed, but are still
stored to the raw data file.

When you check the

Generate TIN

w\Staked Points

box, the Setup DTM 3D

screen will automatically open, which is
primarily used to set up your layers and a
boundary.