Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 184)

Job Menu
R-27
,QVWUXPHQW 6HWWLQJV« : accesses the settings that are specific for the
selected total station. This screen can also be accessed with the
Ctrl
-
[W] hotkey. (See the notice below.)
6HQG WR ,QVWUXPHQW : (applicable only to specific total stations) will
send the selected instrument settings to the total station. This is
particularly useful with robotic total stations after the total station
has been reset.
Serial Port : is the serial port on the data collector used for
communications with the total station.
Baud Rate : is the speed at which communication occurs with the total
station. This must match the baud rate configured within the total
station.
Parity : is the parity used for communication with the instrument.
This must match the parity setting configured within the total
station.
'HIDXOWV : will set the
Serial Port , Baud Rate and Parity to their
default values based on the selected total station.