Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 305)

Survey Pro Reference Manual
R-148
Data : shows the angle and distance information from the previous
shot.
Result : shows the current northing, easting, and elevation of the rod
as well as the computed elevation of the DTM at the current location
and the cut or fill necessary to bring the elevation at the current
location to the elevation of the DTM at the current location.
C.L. : shows the current station and offset information for the rod
location relative to the centerline selected from the previous screen.
The type of line segment in the polyline at the current station is also
displayed. (This card is only available if the
With C.L. checkbox was
checked in the previous screen.)
Note: If the DTM EL and Cut / Fill fields are blank after taking a shot,
it indicates the rod is outside the DTM boundary.
Note: Tapping anywhere within the map view will open a larger map
view, which provides zoom controls.