Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 146)

User’s Manual
140
• Tap 6ROYH. The selected points will be adjusted by the
direction and distance entered.
Translate by Coordinates
The Translate by Coordinates method requires that you define a
starting location and an ending location. The adjustment will then
move all of the selected points in the direction and distance as defined
between the starting and ending locations.
• Check the
Translate by Coordinates checkbox.
• Tap the
From tab and enter the starting location by tapping
the
3RLQW / /RFDWLRQ button and either specify an existing
point name or enter coordinates.
• Tap the
To tab and define the ending location in the same
way as you did above.
• Tap 6ROYH. The selected points will be adjusted in the same
direction and distance as between the starting and ending
location.