Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 379)

Survey Pro Reference Manual
R-222
Note: If the Stake Corners option is selected in the Stakeout Settings
screen, the
1H[W 6WDWLRQ button will also stop at any horizontal or
vertical alignment node, and the beginning and end of any widening
and super elevation that falls within the interval.
%DFNVLJKW« : accesses the Backsight Setup screen (Page R-72).
%DFN : returns to the previous screen.
H. Map Card
The H. Map card displays information about the horizontal details of
the road at the current station.
Segment Type : displays the type of horizontal section at the current
station.
Left / Right : is the description of the left and right templates that are
being used at the current station.
V. Map Card
The V. Map card displays a graphic of the cross-
sectional profile of the road at the current station.
The hinge points and slopes are also displayed.
Slopes Card
The Slopes card is used to specify the desired cut
and fill slopes that will be used when computing
the location of the catch points. These values are
always initialized from the templates every time
the station to be staked is modified. You can then
override these default values here to account for
terrain constraints. Changes to slopes will be
adequately reflected in the V. Map card graphic.
Cut Slope : is the left and right slope, respectively, to use when the
terrain requires a cut (the hinge point is located below the terrain’s
surface).