Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 9)

Getting Started
3
Note: You should keep a record of all registration codes purchased in
case they need to be reentered at some point.
Upgrading from Version 1.x or 2.x to Version 3.0
or later is a chargeable upgrade. Once the new
software is installed, the screen shown here will
be displayed. A new registration code must be
purchased and entered in the
Code field or the
software will only run in Demo Mode, as
described above. Only one upgrade code is
required to upgrade all of the earlier-version
modules that were previously registered.
Users that are upgrading to Version 3.0 or later
from Version 1.x or 2.x must consider the
following limitations before installing the new software:
• You should have a Ranger with at least 32-MB of onboard
memory. The 16-MB models are not sufficient to run the
program and store a large job.
• The Ranger must have Version 2.1 or later of Windows CE
installed before installing the new Survey Pro software.