Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 265)

Survey Pro Reference Manual
R-108
Note: The
&LUFOH =HUR button is not available when using a robotic
total station.
%DFN : returns to the first screen.
6WDNH ! : accesses the third and final Stake Points screen where the
shots to the stake point are performed.
Stake Points – Screen Three
Height of Rod : is the length of the rod.
Design Elev : displays the current design
elevation, which can be modified with the
&KDQJH« button.
FORWARD / BACK : indicates if the rod must
move forward (toward the total station) or
backward (away from the total station).
Go RIGHT / Go LEFT : indicates if the rod must
move to the right or left from the total station’s
point of view.
;
Coarse EDM (Fast Shot) : When checked, sets
the total station to coarse mode for faster, but slightly less-precise
measurements.
CUT / FILL : displays the required amount of cut or fill to bring the
stake point to the design point’s elevation.
Rod Elev : displays the elevation at the rod’s location computed from
the last shot.
&KDQJH« : is used to modify the current design elevation, which will
also modify the associated CUT / FILL value for the current station
being staked.
6KRW : takes a shot to the prism and computes come/go, cut/fill
information.
Shot data : displays the measurements from the last shot.