Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 29)

Getting Started
23
is within the range set here, a message will state that you are on the
line. When performing Remote Stakeout, the final graphic screen
that is displayed when you are near the stake point will occur when
you are within the distance to the stake point specified here.
Turn Gun To Design Point : only applies to motorized total stations.
The following options are available:
•
Yes: 2D (HA only) : The total station will automatically turn
horizontally toward the design point.
•
Yes: 3D (HA and ZA) : The total station will automatically turn
horizontally and vertically toward the design point.
•
No : The total station must be turned manually.
Cut Sheet Offset stored : The cut sheet offset information can be
stored to the raw data file in either of the following formats when
performing any offset staking routine:
•
Design Offset : when selected, a cut sheet report will list the
design-offset values.
•
Actual Offset : when selected, a cut sheet report will list the
measured-offset values.