Spectra Precision Survey Pro CE v3.6 User Manual User Manual

Page 69

Fieldwork

h. According to the screen, the rod must

now move

FORWARD

0.089

feet to be

over the design point. We will assume
that this is close enough and will store
the point from this shot by tapping the

6WRUH« button.

i. Enter the following point information:

Point Name

Description

Staked

and tap

6WRUH . This will return you to

the first Stake Points screen.

5. Stake the next design point.

a. We want to stake the next design point

in the project. We can do this by
entering

in the

Design Point

field and

then pressing

6ROYH ! , or we can

simply tap

1H[W 3RLQW ! , which will

automatically advance the current
design point by the increment value and
solve automatically. Either method will
send you to the second Stake Points
screen.

Note: A negative

Increment

value results in the point number for the

next design point to count down when tapping

1H[W 3RLQW ! .

b. The information needed to locate the next design point is

displayed. When connected to a total station, you would turn
the total station horizontally to 115°00’00”, vertically to
90°00’00” and send the rod man out about 100 feet before
continuing. Tap the

6WDNH !

button to continue to the third

screen.

c. Tap

the

6KRW button and enter the following shot data:

Angle Right

115

Zenith

Slope

Dist

99.8

and then tap

2. to continue.