Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 24)

User’s Manual
18
Units Settings
The Units Settings defines the units that are used within the
software, including those that are sent from the total station, entered
from the keypad and displayed on the screen. You can select the
following settings for your job.
Units for Distances : defines the units used for
distances as Meters , Feet , or International Feet .
Units for Angles : defines the units used for
angles as Degrees or Grads .
Display Directions As : will display directions as
a Bearing or Azimuth .
Azimuth Type : defines if you are using a North
Azimuth or a South Azimuth .
Format Settings
The Format Settings defines the precision (the number of places
beyond the decimal point) that is displayed for various values in all
screens, and how stations are defined.
Note: All internal calculations are performed
using full precision.
Northings / Eastings : will allow you to display
from zero to six places passed the decimal point
for northing and easting values.
Elevations : allows you to display from zero to six
places passed the decimal point for elevations.
Sq Feet / Meters : allows you to display from zero
to four places passed the decimal point for