Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 89)

Road Layout
83
Staking the Road
With your road fully designed, you are now ready to stake the road.
Staking a road is a simple and intuitive process. If you are familiar
with point staking, you should be able to easily stake a road.
This section explains how to get started using the Stake Road routine
and then refers you to the point staking example when the screens
become identical.
1. Tap
5RDGV 5RDG 6WDNHRXW to open the Stake Road screen.
2. Tap the
7DS 5RDG« button to open the Tap on a Road screen. All
of the roads that exist in the current job will be displayed.
3. Tap on the road that you want to stake and then tap
2.. When
the road is selected, it will be drawn with a bold line.
4. If the backsight is not yet defined, tap the
%DFNVLJKW« button to
set up your backsight.
5. With the road selected and the backsight set up, tap
1H[W ! to
continue. The next screen that opens shows the profile of the
road at the starting station.
6. In the Station to Stake field, enter the
station that you want to stake and in the
Station Interval field, enter the distance
that you want the Station to Stake to
advance when you are ready to stake the
next station.
7. Use the
and !! buttons to select the
node (the segment end point) on the
template shown in the graphic area of the
screen that you want to stake at the
current station. Each press of either of
these buttons will advance the selection
to the next node and display the name of the selected segment in
the middle of the screen. The selected node is show in the graphic
portion of the screen as a circle.
8. Once the correct station to stake is entered and the desired node
is selected, tap the
1H[W ! button to continue.