Spectra Precision Survey Pro CE v3.6 User Manual User Manual

Page 85

Road Layout

6. Enter the following data then tap

2.:

North: 5000
East: 5000
Elev: 100
Start Station: 0+00

7. The next step is to add the templates.

We will use the template created earlier
to define both sides of the road. Tap the

7HPSODWHV tab.

8. With

selected in the

eft column,

tap the

$GG« button. This opens the Add Left Template screen,

which allows you to add a template to the left side of the road.

9. All the available templates will be displayed in the

Template

column. Select the

template, created earlier.

10. Since we will use this template for both

sides of the road, check the

;

Mirror to

Right

checkbox and tap

2.. We now

have the minimum number of
components to completely define a road:
an alignment, and a left and right
template.

11. Tap

&KHFN« to confirm that the road is

okay. You should get a message stating
success.

Note: once templates have been added, you can return to the Road
card and tap the

9LHZ 3URILOHV« button to view the cross-sectional

profile of the road at any station.