Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 60)

User’s Manual
54
b. Tap
,QVHUW« and enter a new point
using the General and Location cards
with the following values, as shown:
Point Name : 2
Northing : 5050
Easting : 5050
Elevation : 100
Description : Backsight
and then tap
2..
4. Set up your backsight. In this example, we will set up on Point 1
and backsight Point 2, which was just created.
a. Access the
6XUYH\ , %DFNVLJKW 6HWXS screen.
b. In the Occupy Point field, enter 1 as the point name.
Tip: You can also select an existing point from a map view or
from a list by using the
power button.
c. Enter an HI and HR of 5 feet each.
d. Toggle the
%6 'LUHFWLRQ
/
%6 3RLQW
button to
%6 3RLQW
and enter 2 as the point name.
e. Leave the Fixed HR at Backsight field unchecked.
f. Confirm that the Backsight Circle value is zero. If it displays a
non-zero value, tap the
&LUFOH«
button and set it to zero.