Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 30)

User’s Manual
24
Repetition Settings
The Repetition Settings contains the settings that control how
repetition shots are performed and the acceptable tolerances.
Horizontal Tolerance : a warning message will be
displayed if a horizontal angle exceeds the
tolerance entered here during a repetition shot.
Zenith Tolerance : a warning message will be
displayed if a vertical angle exceeds the
tolerance entered here during a repetition shot.
Distance Tolerance : a warning message will be
displayed if a distance exceeds the tolerance
entered here during a repetition shot.
Shoot Distance To Backsight : when checked, a
distance will be measured to each shot to the
backsight. When unchecked, only the angles are measured.
Do Not Shoot Reverse Distances : when checked, distances are not
measured during reverse shots.
Enable Automatic Repetition : when checked, all remaining shots
after the first shot to the backsight and foresight will occur
automatically when using a motorized instrument.
Shooting Sequence : specifies the order that the shots are taken from
the following options:
•
BS > FS ^ FS > BS : Backsight, Foresight, flop, Foresight
Backsight
•
BS > FS ^ > BS > FS : Backsight, Foresight, flop, Backsight,
Foresight
•
BS ^ BS > FS ^ FS : Backsight, flop, Backsight, Foresight, flop,
Foresight
•
FS ^ FS > BS ^ BS : Foresight, flop, Foresight, Backsight, flop,
Backsight
•
FS > BS ^ BS > FS : Foresight, Backsight, flop, Backsight,
Foresight