Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 180)

File Menu
R-23
that indicates how much of the file has been transferred. Tapping
&DQFHO will stop the file transfer.
Note: The Send routine should be initiated shortly after issuing the
receive command on the other device.
5HFHLYH )LOH« : allows you to receive a file from another device. This
should be tapped prior to issuing the Send command on the other
device. Tapping
&DQFHO will stop the file transfer.
Register Modules
)LOH 5HJLVWHU 0RGXOHV
The Register Modules screen is used to upgrade the Survey Pro
software. Refer to the User’s Manual for more information on
registering additional modules.
If no modules have been registered, Survey Pro
will run in Demo Mode. When running in Demo
Mode, users are able to test and use every
routine available in the software, as if the
Survey Pro Max module was purchased.
Although, Demo Mode limits all jobs to no more
than 25 points. If a job exists on the data
collector that contains more than 25 points, it
cannot be opened while running in Demo Mode.
Registered : Indicates that the corresponding
module has been added.
5HJLVWHU« : Opens the Register dialog box, shown,
where the registration number for a particular module
can be entered.