Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 127)

Screen Examples
121
8. If defining a ditch enter the depth of the ditch as a negative value
in the Height field. If defining a curb, enter the height of the curb
as a positive value in the Height field.
9. Enter the horizontal width of the curb or ditch in the Offset From
Edge of Road field.
Note: You can tap in the graphic portion of the screen to open the
graphic in a larger window.
10. Tap
1H[W ! to continue to the next screen.
11. Enter the first station that you want to
stake in the Station to Stake field. This
station will be referenced from the Begin
Station , assigned to the starting point of the
centerline earlier.
12. Enter the distance between each station
that you want to stake in the Station Interval
field.
13. Enter the Fill Slope and Cut Slope in the
respective fields. These slopes will be used
to compute the location of the catch point for
either cut or fill situations.