Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 131)

Screen Examples
125
Intersection
The Intersection screen computes and optionally stores the
coordinates for the intersection of two lines that are tangent to
existing points.
Each line is independently defined by a known direction or a known
length. In the situation where there is more than one possible
solution, each solution is provided and optionally stored.
1. From the Main Menu, select
&RJR ,
,QWHUVHFWLRQ .
2. In the Point 1 field, enter the point name
that is tangent to the first line that
intersects with the other line.
3. Toggle the first button to
'LVWDQFH or
$]P RU %UJ , depending on if the first
line intersects at a known distance from
Point 1 , or at a known direction from
Point 1 , respectively.
4. In the same way that you defined the first line, define the second
line tangent to Point 2 in the Second Point section of the screen.
5. If you want to store the intersecting point(s) that are computed
from the routine, check the Store Points checkbox and specify a
point name in the same field. If there is more than one solution,
the additional points will be stored with the next sequential point
name.
6. Tap
6ROYH to compute the intersecting points.
You can view the point’s coordinates by tapping
the
5HVXOWV tab and see a graphical
representation of the intersections by tapping the
0DS tab.
The map shown here illustrates a situation where
two intersections were computed from a line with a
known length tangent to Point 1 and a line with a
known direction tangent to Point 2.