Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 217)

Survey Pro Reference Manual
R-60
&OHDU : will unselect the selected boundary and move it to the
Auxiliary layer.
%UHDNOLQHV« : will open the Add/Edit Break-lines screen where DTM
break-lines can be added or edited.
3RLQWV« : will open the Points on DTM Layer screen where the points
on the DTM layer can be viewed, new points can be imported, and
existing points can be deleted (moved to the Auxiliary layer).
' 9LHZ« : will open the 3D View screen where the DTM can be
viewed from any angle.
Layers for Staking DTM
-RE 9LHZ '70 /D\HUV«
The Layers for Staking DTM screen is used to
select the DTM layer and an optional layer
where non-DTM points will be stored.
Layer (DTM): is the layer that contains the
points that you want to use for the DTM.
Select Auxiliary Layer : if this is checked and a
point is stored that is located outside the
selected DTM boundary, the point is
automatically stored on the Auxiliary layer. If
left unchecked, a prompt will appear when
storing a point outside the boundary where you must specify the layer
to store the new point.
Layer (Auxiliary): is the layer that all points will be stored to if they
cannot be stored to the DTM layer.