Building an alignment – Spectra Precision Survey Pro CE v3.6 User Manual User Manual

Page 83

Road Layout

6. Tap

2. to return to the New Template screen where the new

curb segment will appear.

7. With

selected, tap

,QVHUW« and enter the following

data to add a sidewalk and then tap

2..

Segment Name: Sidewalk
Horizontal Dist: 4
Slope: 0

8. With

selected, tap

,QVHUW« and

enter the following data to add a ditch
and then tap

2..

Segment Name: Ditch
H. Offset: 2
Slope: -40

9. Tap

2. from the New Template

screen and the Save As dialog box
will open. Enter

in the

Name

field

and tap

2.. This completes the

creation of a template.

Building an Alignment

The Edit Alignments routine is used to create an alignment and is
explained in detail starting on Page 41. If you do not currently have
any alignments stored on the data collector, either create a simple
alignment now that is at least 300 feet long, or follow the instructions
that start on Page 41 to create a new alignment that contains each
possible type of horizontal and vertical section.