Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 304)

Stakeout Menu
R-147
DTM Shot
6WDNHRXW 6WDNH '70 6ROYH
The DTM Shot screen displays all relevant information on the current
rod position and a graphic that shows the rod location, backsight, the
occupied TIN triangle, and the rectangular DTM corners that
encompass the DTM boundary.
Note: the DTM boundary corners and TIN triangle are not always
visible depending on the current scale of the screen.
7DNH 6KRW« : triggers the total station to take a
shot to the prism.
Note: You must be within the boundary of the
DTM before any cut / fill information is
provided.
' 9LHZ« : accesses the 3D View screen (Page
R-64) where a 3D view of the DTM can be
viewed from any angle as well as cut / fill
information for the current location.
Note: The
' 9LHZ« button is only available when
Generate TIN
w\Staked Points is checked in the previous screen and at least three
stake points have been stored.
6WRUH : stores a point for the current rod location with the point name
shown in the St Pt field and the description in the Desc field. Also
advances the St Pt to the next available point name.
St Pt : is the point name that will be assigned to the next stored point.
Desc : is the description that will be assigned to the next stored point.
HR : is the height of the rod.