Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 145)

Screen Examples
139
Translate Adjustment
The Translate routine will move points horizontally and/or vertically
a specified distance and direction. This routine is often used after a
survey was performed in an assumed coordinate system. If the actual
coordinates for at least one of the points is found later, the Translate
routine can be used to shift all of the affected points to the correct
coordinate system and/or elevation.
1. Tap
$GMXVW , 7UDQVODWH from the Main
Menu.
2. Use the
7DS 3RLQWV« or 7R)URP« button
to select the points that need to be
adjusted.
3. Define the direction and distance for the
adjustment using either of the following
two methods:
Translate by Distance and Direction
The Translate by Distance and Direction method simply requires that
you enter the distance and direction to adjust the selected points.
• Leave the
Translate by Coordinates
checkbox unchecked.
• Toggle the $]LPXWK / %HDULQJ
button to the desired format and enter
the direction to adjust the selected
points.
• Enter the horizontal distance to adjust the selected points in
the Distance field.
• Enter the elevation to adjust the selected points in the
Elevation field.