Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 208)

Job Menu
R-51
Start Station : is the station on the alignment that corresponds with
the starting location or point.
Edit Alignment Screen – General Tab
The General tab in the Edit Alignment screen is
used to describe the alignment and select the
layer where it is located.
Description : is the description of the alignment.
Layer : is the layer where the alignment will be
located.
$WWULEXWHV : accesses the Point Feature
Attributes screen (Page R-43) where the feature
attributes for the alignment can be selected.
Edit Segment
The Edit Segment screen is accessed anytime an existing horizontal
or vertical segment is added or edited. A variety of segment editing
screens are possible depending on the type of segment being edited or
created. Each segment editor is discussed below.
Edit Segment – Line Card
The Line card is used to add a straight horizontal line segment in the
alignment.
Length : is the horizontal length of the line.
;
Make this segment tangent to previous :
When checked, the specified line will be tangent
to the ending tangent of the previous segment.