Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 242)

Survey Menu
R-85
Vertical Angle Offset
6XUYH\ 9HUWLFDO $QJOH 2IIVHW
, or
Ctrl
-[Q]
The Vertical Angle Offset screen allows you to compute and store the
location of a new point that exists directly above or below the rod
location, but cannot be occupied, such as the top of a utility pole.
The new point will have the same coordinates as the rod location, but
with a different elevation.
6HWWLQJV : located at the top of the screen, is a
shortcut to the Surveying Settings screen (Page
R-32).
Foresight : is the point name that will be used
when storing the new point.
6KRRW 3ULVP : will take a shot to the prism.
$LP =HQLWK : will read the vertical angle
measured by the total station, which should be
facing the new point’s location.
%DFNVLJKW« : accesses the Backsight Setup
screen (Page R-72).