Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 122)

User’s Manual
116
Once the total station is aiming near the prism, the
6HDUFK button is
used to start the total station in a search pattern. The search pattern
continues until it finds the prism.
The
/RFN button puts the total station in track mode where it will
track the movements of the prism and
6WRS will stop the total
station from tracking the prism.
Taking a Shot in Remote Mode
When running in a non-remote mode, tapping
the
7UDYHUVH or 6LGH 6KRW button will simply
trigger the total station to take a shot. When
running in remote mode, tapping these buttons
will open the Remote Shot screen, shown here.
The Remote Shot screen is identical to the
Remote Control screen except it has an
additional button that allows you to trigger the
total station to take a shot. The screen is used to
properly align the total station with the prism
prior to taking a shot. Once the total station is
aligned, a shot is taken by tapping the
7DNH 6KRW button.
If the Remote Shot screen was accessed by performing a side shot,
you will return to the Remote Shot screen after the shot is completed.
If the Remote Shot screen was accessed by performing a traverse
shot, you will return to the Traverse / Sideshot screen after the shot
is completed.