Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 278)

Stakeout Menu
R-121
2. The Angle Right value is changed to zero to reflect the change. The
instrument now needs to be turned horizontally to zero to face the
current target location.
3. To prevent errors if this button is used, the backsight set up is
invalidated when exiting the Stakeout dialog. A circle zeroed on a
design point is meaningless once the design point has been
staked.
Note: The
&LUFOH =HUR button is not available when using a robotic
total station.
%DFN : returns to the previous screen.
6WDNH ! : accesses the next screen, which is identical to the third
Stake Points screen, described on Page R-108.