Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 100)

User’s Manual
94
last stake point and the
&/ card displays information related
to the last stake point in relation to the centerline, if selected
earlier.
View the DTM
16. Tap
' 9LHZ« to access the 3D View
screen. While staking points, you should
periodically tap this button to view what
the current DTM surface looks like. This is
a useful quality assurance technique to
determine where additional points are
needed.
Note: The
' 9LHZ« button is only available
when Generate TIN w\Staked Points is checked
in the Stake DTM screen and at least three
stake points have been stored.
When the button is activated (pressed in), dragging within the 3D
View will result in the image being rotated to any angle. When the
button is not activated, dragging within the 3D View will move the
image to any location.
The
9ROXPH button will display the total cut and fill volume between
the area that has been staked and a reference datum, whose elevation
is displayed in the
Datum field and is set in the 3D View Settings
screen; or the total cut and fill between the area that has been staked
and the selected DTM.
Note: The cut and fill values accessed from the
9ROXPH button are
volumes, where the cut and fill values represented in the Result card
of the DTM Shot screen are vertical distances.
The button toggles to display or hide the point names and
descriptions in the 3D view.