Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 360)

Roads Menu
R-203
Edit Template
5RDGV (GLW 7HPSODWHV (GLW«
or
5RDGV (GLW 7HPSODWHV 1HZ«
The Edit Template screen is identical to the New Template screen
and is used to create a new template or edit an existing one.
All of the segments of the current template are
listed in the screen. The list shows the name of
each segment, the horizontal and vertical offsets
(lengths), and the slope.
Note: The length of the first segment must be
greater than zero.
Cut Slope : is the slope that will be used when
locating the catch point in a situation where the
existing terrain is above the level of the hinge
point.
Fill Slope : is the slope that will be used when locating the catch point
in a situation where the existing terrain is below the level of the
hinge point.
,QVHUW« : opens the Edit Segment screen where a new segment will
be added prior to (above) the segment selected in the Edit Template
screen.
Note: To add a segment to the end of all existing segments (furthest
away from the centerline), be sure
is selected from the Edit
Template screen prior to tapping
,QVHUW«.
(GLW« : opens the Edit Segment screen where the details of the
selected segment can be edited.
Note: The selected segment is shown with a thicker line in the map
view in the lower portion of the Edit Template screen.