Xerox 7245 User Manual
Workcentre
Table of contents
Document Outline
- Network Connectivity
- Installation Steps A1
- Settings List A6
- Ethernet Speed Setting A2
- Enable Internet Services (HTTP) A9
- Proxy Server Settings
- Parallel Port Configuration A7
- SNMP Configuration A8
- Changing the Administrator Password A10
- NOS Selection
- TCP/IP Protocol Configuration B1
- TCP/IP LPD Enablement B13
- TCP/IP Dynamic Addressing B15
- Configure Port 9100 (Raw Printing) B8
- Microsoft (NetBEUI) Networks B5
- Microsoft (NetBIOS over IP) Networks B6
- Novell NetWare 4.x, 5.x (NDS) Networks B3
- Novell NetWare 3.1x (Bindery) Networks B4
- IPP Configuration B14
- EtherTalk (AppleTalk) Configuration B7
- Print Drivers
- TCP/IP Peer to Peer (LPR or Standard TCP/IP) Printing D1
- NetBEUI Peer to Peer Printing D6
- NetBIOS over IP Peer to Peer Printing D7
- NetBIOS over IP Client/Server Printing D4
- IPP Printing (Windows 2000 & XP) D13
- EtherTalk (AppleTalk) Peer to Peer Printing D8
- NetWare 3.12 and 4.x/5.x (Bindery) Printing D16
- NetWare 4.xx (NDS) Printing D17
- Common UNIX Printing System (CUPS)
- Options
- Enabling Options with Software Keys
- Scanning to the Device’s Hard Drive
- Installing and Using the Network Scanner Utility2 E16
- Before Installing the Network Scanner Utility2
- Installing the Network Scanner Utility
- Uninstalling the Network Scanner Utility
- Importing Scanned Data from the Mailbox to an Image-Editing Application
- Importing Scanned Data from the Mailbox using Mailbox Viewer2
- Changing Network Utility or Mailbox Viewer Settings
- Scan to E-mail
- Internet Fax (iFAX)
- Server Fax
- Fax
- Fax Overview FP
- Before You Start Fax FP1
- Local Terminal Information Settings FP2
- Address Book Setup FP3
- Group Send Setup FP5
- Comments FP7
- Create a Mailbox FP9
- File Destination / Output Destination FP11
- Fax Settings (including Fax Defaults and Fax Control) FP13
- LAN Fax (PCL Drivers) FP15
- LAN Fax (PostScript Drivers)
- Scan to PC (FTP/SMB)
- Setup and Use of Job Flow Sheets with Mailboxes
- Scan to PC Desktop
- Network Scanning (using templates)
- Web Service (if available)
- Security – Authentication (by Auditron Administration)
- Overview
- Services Managed by User ID Authentication
- Effects of Authentication on Job Flow Sheets and Mailboxes
- Configuring Local machine authentication
- Configuring Remote authentication
- Configuring Network authentication (by a remote Accounting server)
- Encryption Service Overview
- Configuration of HTTP Communication Encryption
- Configuration of E-mail Encryption/Digital Signature
- Configuration of Scan File Signatures (PDF/DocuWorks Documents)
- Security – Hard Disk Overwrite
- Security – Digital Watermark
- Security – Secure Print
- Xerox Standard Accounting
- Overview
- Enable Xerox Standard Accounting (from Internet Services)
- Create a Group Account
- Create a User Account and Set Usage Limits
- Maximum Usage Limits and Resetting Individual Usage Limits
- Using XSA at the machine
- Resetting Usage Data
- Print a Usage Report
- Enable XSA in your Print Drivers
- Backing Up XSA data and settings and Cloning to another device
- Audit Log
- Annotation (Bates Stamping)
- Internet Services
- Enable Internet Services (HTTP) C3
- Overview N1.0
- Status Tab N1.01
- Jobs Tab N1.1
- Print / Scan Tab
- Properties Tab N1.3
- Support Tab N1.5
- Additional Details of some Properties Tab features
- Setting TIFF (and other PDL) Processing Properties N3.2
- Setting PDL Emulations N3.3
- Set the Ethernet Speed N5.0
- Configure NetWare Settings N5.2
- Configure TCP/IP Settings N5.3
- Configure LPD N5.6
- Configure SNMP N5.4
- Configuring SNMP Community Names with Internet Services
- Configure SMB N5.5
- Configure IPP N5.7
- Modify the HTTP (Internet Services) Settings N5.8
- Configure Port 9100 (Raw Printing) N5.9
- Restricting Device Access N.5.8.2
- Configure EtherTalk (AppleTalk) N5.10
- E-mail, SMTP, and POP3 Settings
- Bonjour
- Troubleshooting