Xerox 7245 - Manual (Page 50)

50
7. Select Directory (NDS) as your Mode.
8. Enter in a polling rate for Polling Interval.
9. Enter in a SAP (service advertising protocol) frequency, or set SAP frequency to zero (off).
10. Type a Password for the Device to log into the NetWare Server, and type it a second time for
confirmation.
11. For NetWare NDS (NetWare Directory Services), type a directory tree name and context (typeful
name in the NDS environment). Note: Since there is no Browse function, you MUST manually enter
in this information. For example: O=xerox.OU=engineering.
12. For Frame Selection, if in doubt, leave the setting at its Auto sensing default value.
13. Click the Apply button, then click the Reboot button to reboot the Device and apply setting changes.