Xerox 7245 - Manual (Page 113)

113
Enabling the E-mail Ports and Setting TCP/IP
First enable the E-mail ports, then set the IP address.
Note: The configuration can also be performed using CentreWare Internet Services.
For information on how to use CentreWare Internet Services, refer to the Internet Services section of
this guide.
1. Display the System Administrator Menu screen.
a. Press the Log In/Out button.
b. Enter the user ID with the numeric keypad or a keyboard displayed by pressing Keyboard, and
select Confirm.
Note: The default user ID is “11111”. When using the Authentication feature, a password is required.
The default password is “x-admin”.
c. Select System Settings .
2. Enable a port which is used for the E-mail feature.
a. Select System Settings .
b. Select Network Settings .
c. Select Port Settings .
d. On the Port Settings screen, select Send E-mail and then select Change Settings.
e. On the Send E-mail screen, select Port Status and select Change Settings.
f. On the Send E-mail Port Status screen, select Enabled then select Save.
g. Select Close .
h. On the Port Settings screen, select Receive E-mail, then select Change Settings.
i. On the Receive E-mail screen, select Port Status, then Change Settings.
j. On the Receive E-mail Port Status screen, select Enabled, then select Save and Close.
k. On the Port Settings screen, select Mail Notice Service, then select Change Settings.
l. On the Mail Notice Service screen, select Port Status, then Change Settings.
m. On the Mail Notice Service – Port Status screen, select Enabled, then Save.
n. Select Close repeatedly until the Network Settings screen is displayed.